Suspension Clamp-for 4-7mm Cable

Weight .020 kg
SKU: ZU49VOR

35.40

In Stock

For fiber optic or copper cable, with round or flat cross section.

For span length up to 50-70 m according to climatic conditions.

In Stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
  • Type: Organic
  • MFG: Jun 4.2021
  • LIFE: 30 days
SKU: ZU49VOR Category:

Description

For fiber optic or copper cable, with round or flat cross section.

For span length up to 50-70 m according to climatic conditions.

Route deviation angle up to 20°

Openable fastening loop which can be put into a ring or hole minimum Ø 14 mm.

Distance between the cable and the hanging point on the loop: 70 mm

Bilateral holding of the cable by two wedges with progressive tightening. Locking of the clamp by two double racks.

Dimensions : L 80 mm, l 16 mm, H 85 mm.

Specification
Material Glass Filled Nylon
Weight (Kg) 0.020
Vertically Strenght (Dan) 120

Additional information

Weight .020 kg

1 review for Suspension Clamp-for 4-7mm Cable

  1. admin

    Sed perspiciatis unde omnis iste natus error sit voluptatem accusantium doloremque laudantium.

Add a review

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsSuspension Clamp-for 4-7mm Cable removeSS Strap-207 removeAnchoring Clamp-for 4-7mm Cable removeAdjustable Cable Storage Bracket removeSuspension Clamp-for 8-20mm Cable removeSS Strap-107 remove
NameSuspension Clamp-for 4-7mm Cable removeSS Strap-207 removeAnchoring Clamp-for 4-7mm Cable removeAdjustable Cable Storage Bracket removeSuspension Clamp-for 8-20mm Cable removeSS Strap-107 remove
Image
SKUZU49VORUCB59F95MK
Rating
Price35.4063.7544.851,324.00234.8535.40
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionFor fiber optic or copper cable, with round or flat cross section. For span length up to 50-70 m according to climatic conditions.For fastening of pole hardware.
Item Description
For fiber optic or copper cable, with round or flat cross section. "For span length up to 50-70 m according to climatic conditions." Strength load up to 160 daN according to the cable used. It is recommended to perform a qualification strength test with the cable. Openable fastening loop with clip closing, which can be put into a ring or hole minimum Ø 12 mm. Dimensions : L 245 mm, l 27 mm, H 32 mm.
Adjustable Aluminum cable storage bracket made from aluminum alloy is rust resistant hence has a long service life. The arms of the bracket are also made from aluminum alloy hence once again it is rust free. The arms are very easily adjustable by using a spanner to control the arms extension. Easy to install on poles using straps with buckles.For fastening of pole hardware.
ContentFor fiber optic or copper cable, with round or flat cross section. For span length up to 50-70 m according to climatic conditions. Route deviation angle up to 20° Openable fastening loop which can be put into a ring or hole minimum Ø 14 mm. Distance between the cable and the hanging point on the loop: 70 mm Bilateral holding of the cable by two wedges with progressive tightening. Locking of the clamp by two double racks. Dimensions : L 80 mm, l 16 mm, H 85 mm.
Specification
Material Glass Filled Nylon
Weight (Kg) 0.020
Vertically Strenght (Dan) 120
Specification
Width : 20mm Approax Thickness : 0.7 ± 0.05MM Approax Tensile Strength : 7.5 KN Tracebility Length Packaging Type : Plastic case Length Per Roll : 50 Mtr
Secification
Glass Filled Nylon Outer Body Moc PA-6 30% GF Black Saddle Moc PA-6 30% GF Black Connecting Thread Moc is Neoprene Connecting Thread Hardness :- 79 Shore A
Specification
Material of Body Alluminium Alloy Grade (AA1200)
Material of ROD Alluminium Alloy as per IS-733-1983
Tolerance IS-2102
Fastners Grade IS 1364 Part 1-6
M10 NUT IS 2629
Fastners Bolt & Washer M10
All Dimension are in mm
Description
S.No.  Details Particulars
1. Type of Clamp Suspension Clamp
2. Type of design Mounting clamp with Insert arrangement. Multiple orientation allowability
3. Cable Diameter Range Ø8 - Ø20mm
4. Mounting Using Stainless Steel Strap or Bolts
5. Type & Grade of the Material Clamp Body -- UV Resistant Thermoplastic Insert --Elastomer
6. Minimum Breaking Load (in KN) 3.5 kN
7. Weight 125g
Specification
Width 10mm Approax
Thickness 0.5 ± 0.05MM Approax
Tensile Strength 7.5 KN
Tracebility Length
Packaging Type Plastic case
Length Per Roll 50 Mtr
Weight.020 kgN/A.040 kg.745 kg.125 kg.035 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight .020 kg
Weight .040 kg
Weight .745 kg
Weight .125 kg
Weight .035 kg
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare