Suspension Clamp-for 4-7mm Cable

Weight .020 kg
SKU: ZU49VOR

35.40

In Stock

For fiber optic or copper cable, with round or flat cross section.

For span length up to 50-70 m according to climatic conditions.

In Stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
  • Type: Organic
  • MFG: Jun 4.2021
  • LIFE: 30 days
SKU: ZU49VOR Category:

Description

For fiber optic or copper cable, with round or flat cross section.

For span length up to 50-70 m according to climatic conditions.

Route deviation angle up to 20°

Openable fastening loop which can be put into a ring or hole minimum Ø 14 mm.

Distance between the cable and the hanging point on the loop: 70 mm

Bilateral holding of the cable by two wedges with progressive tightening. Locking of the clamp by two double racks.

Dimensions : L 80 mm, l 16 mm, H 85 mm.

Specification
Material Glass Filled Nylon
Weight (Kg) 0.020
Vertically Strenght (Dan) 120

Additional information

Weight .020 kg

1 review for Suspension Clamp-for 4-7mm Cable

  1. admin

    Sed perspiciatis unde omnis iste natus error sit voluptatem accusantium doloremque laudantium.

Add a review

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsSuspension Clamp-for 4-7mm Cable removeVIBERATION DAMPER removeSS Strap-207 removePCL RACHET TYPE BANDING TOOL removePole Clamp- Type 1 removeAnchoring Clamp-for 4-7mm Cable remove
NameSuspension Clamp-for 4-7mm Cable removeVIBERATION DAMPER removeSS Strap-207 removePCL RACHET TYPE BANDING TOOL removePole Clamp- Type 1 removeAnchoring Clamp-for 4-7mm Cable remove
Image
SKUZU49VOR
Rating
Price35.40356.0063.7511,850.001,304.0044.85
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionFor fiber optic or copper cable, with round or flat cross section. For span length up to 50-70 m according to climatic conditions.Spiral Vibration Dampers have a helically formed damping section sized for interplay of damper and cable to provide the action/reaction motion that opposed the natural vibration wave. A smaller gripping section gently grips the cable so that cable and fiber are not damaged or distorted and there is no optical signal loss. These PVC Spiral dampers are recommended for the ADSS cable when the combination of span length and tension indicate by vibration review that external vibration protection is required.For fastening of pole hardware.
Item Description
For fiber optic or copper cable, with round or flat cross section. "For span length up to 50-70 m according to climatic conditions." Strength load up to 160 daN according to the cable used. It is recommended to perform a qualification strength test with the cable. Openable fastening loop with clip closing, which can be put into a ring or hole minimum Ø 12 mm. Dimensions : L 245 mm, l 27 mm, H 32 mm.
ContentFor fiber optic or copper cable, with round or flat cross section. For span length up to 50-70 m according to climatic conditions. Route deviation angle up to 20° Openable fastening loop which can be put into a ring or hole minimum Ø 14 mm. Distance between the cable and the hanging point on the loop: 70 mm Bilateral holding of the cable by two wedges with progressive tightening. Locking of the clamp by two double racks. Dimensions : L 80 mm, l 16 mm, H 85 mm.
Specification
Material Glass Filled Nylon
Weight (Kg) 0.020
Vertically Strenght (Dan) 120
Specification
Material : Aluminium Usage/ Application : Industrial Thikness : 14 mm Packaging Type : Box
Specification
Width : 20mm Approax Thickness : 0.7 ± 0.05MM Approax Tensile Strength : 7.5 KN Tracebility Length Packaging Type : Plastic case Length Per Roll : 50 Mtr
Product Code STTB
Max. band width (mm) <25
Max. band thickness (mm) <1.2
Hot Dip Galvanized surface treatment, against rust and corision
Specification
Material : Zinc
Secification
Glass Filled Nylon Outer Body Moc PA-6 30% GF Black Saddle Moc PA-6 30% GF Black Connecting Thread Moc is Neoprene Connecting Thread Hardness :- 79 Shore A
Weight.020 kg.310 kgN/A1.160 kg.975 kg.040 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight .020 kg
Weight .310 kg
Weight 1.160 kg
Weight .975 kg
Weight .040 kg
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare