Suspension Clamp-for 4-7mm Cable

Weight .020 kg
SKU: ZU49VOR

35.40

In Stock

For fiber optic or copper cable, with round or flat cross section.

For span length up to 50-70 m according to climatic conditions.

In Stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
  • Type: Organic
  • MFG: Jun 4.2021
  • LIFE: 30 days
SKU: ZU49VOR Category:

Description

For fiber optic or copper cable, with round or flat cross section.

For span length up to 50-70 m according to climatic conditions.

Route deviation angle up to 20°

Openable fastening loop which can be put into a ring or hole minimum Ø 14 mm.

Distance between the cable and the hanging point on the loop: 70 mm

Bilateral holding of the cable by two wedges with progressive tightening. Locking of the clamp by two double racks.

Dimensions : L 80 mm, l 16 mm, H 85 mm.

Specification
Material Glass Filled Nylon
Weight (Kg) 0.020
Vertically Strenght (Dan) 120

Additional information

Weight .020 kg

1 review for Suspension Clamp-for 4-7mm Cable

  1. admin

    Sed perspiciatis unde omnis iste natus error sit voluptatem accusantium doloremque laudantium.

Add a review

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsSuspension Clamp-for 4-7mm Cable removePCL RACHET TYPE BANDING TOOL removeAnchoring Clamp-for 10-14mm Cable removeAdjustable Cable Storage Bracket removeSuspension Helix removeBracket Single Run remove
NameSuspension Clamp-for 4-7mm Cable removePCL RACHET TYPE BANDING TOOL removeAnchoring Clamp-for 10-14mm Cable removeAdjustable Cable Storage Bracket removeSuspension Helix removeBracket Single Run remove
Image
SKUZU49VORIKSA764UCB59DTL124
Rating
Price35.4011,850.00392.951,324.00428.0023.60
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionFor fiber optic or copper cable, with round or flat cross section. For span length up to 50-70 m according to climatic conditions.Plastic Anchor Clamp Tension type is used for ending over head lines to poles or walls. The clamp is made of Plastic and can be used for Optical Fiber Cable Dia 10-14 mm. Plastic Anchor Clamp has a modular design which allows easy handling, compactness and is light weight. The design does not allow corrosion and UV rays to damage. Widely acclaimed for fixing the line at the end bracket. Commonly used for ADSS Installation Tension type for Optical Fiber Cables.Adjustable Aluminum cable storage bracket made from aluminum alloy is rust resistant hence has a long service life. The arms of the bracket are also made from aluminum alloy hence once again it is rust free. The arms are very easily adjustable by using a spanner to control the arms extension. Easy to install on poles using straps with buckles.Suspension Helix shall be made of hot dip galvanized high Tensile steel wires or Aluminum alloy which are laid side by side and glued together and bent to form a loop in the middle.Bracket Single Run used for Drop Wire in Telecommunication Industry
ContentFor fiber optic or copper cable, with round or flat cross section. For span length up to 50-70 m according to climatic conditions. Route deviation angle up to 20° Openable fastening loop which can be put into a ring or hole minimum Ø 14 mm. Distance between the cable and the hanging point on the loop: 70 mm Bilateral holding of the cable by two wedges with progressive tightening. Locking of the clamp by two double racks. Dimensions : L 80 mm, l 16 mm, H 85 mm.
Specification
Material Glass Filled Nylon
Weight (Kg) 0.020
Vertically Strenght (Dan) 120
Product Code STTB
Max. band width (mm) <25
Max. band thickness (mm) <1.2
Specification
  • U Saddle Moc PA-6 30% GF (RAL 9005)
  • SS Rope Type Wire Grade 304
  • Wedge LH-RH Moc PA-6 30% GF (RAL 9005)
  • Aluminium Lug Grade 7075
  • Outer Body Moc PA-6 30% GF (RAL 9005)
  • SS Screw ITH Electroless Planting Grade C
Specification
Material of Body Alluminium Alloy Grade (AA1200)
Material of ROD Alluminium Alloy as per IS-733-1983
Tolerance IS-2102
Fastners Grade IS 1364 Part 1-6
M10 NUT IS 2629
Fastners Bolt & Washer M10
All Dimension are in mm
Specification
Material : Aluminium Usage/ Application : Industrial Thikness : 14 mm Packaging Type : Box
Specification
Glass Filled Nylon MOC IS PA-6 30% GF Black Dimension in mm (L*B*H): 72.8*47.2*31.2
Weight.020 kg1.160 kg.380 kg.745 kg.315 kg.025 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight .020 kg
Weight 1.160 kg
Weight .380 kg
Weight .745 kg
Weight .315 kg
Weight .025 kg
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare