Suspension Clamp-for 4-7mm Cable

Weight .020 kg
SKU: ZU49VOR

35.40

In Stock

For fiber optic or copper cable, with round or flat cross section.

For span length up to 50-70 m according to climatic conditions.

In Stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
  • Type: Organic
  • MFG: Jun 4.2021
  • LIFE: 30 days
SKU: ZU49VOR Category:

Description

For fiber optic or copper cable, with round or flat cross section.

For span length up to 50-70 m according to climatic conditions.

Route deviation angle up to 20°

Openable fastening loop which can be put into a ring or hole minimum Ø 14 mm.

Distance between the cable and the hanging point on the loop: 70 mm

Bilateral holding of the cable by two wedges with progressive tightening. Locking of the clamp by two double racks.

Dimensions : L 80 mm, l 16 mm, H 85 mm.

Specification
Material Glass Filled Nylon
Weight (Kg) 0.020
Vertically Strenght (Dan) 120

Additional information

Weight .020 kg

1 review for Suspension Clamp-for 4-7mm Cable

  1. admin

    Sed perspiciatis unde omnis iste natus error sit voluptatem accusantium doloremque laudantium.

Add a review

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsSuspension Clamp-for 4-7mm Cable removeVIBERATION DAMPER removeSuspension Clamp-for 8-20mm Cable removeUniversal Pole Bracket-Single Run removePole Clamp- Type 2 removeTurn Buckle remove
NameSuspension Clamp-for 4-7mm Cable removeVIBERATION DAMPER removeSuspension Clamp-for 8-20mm Cable removeUniversal Pole Bracket-Single Run removePole Clamp- Type 2 removeTurn Buckle remove
Image
SKUZU49VOR
Rating
Price35.40356.00234.85200.601,542.00442.00
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionFor fiber optic or copper cable, with round or flat cross section. For span length up to 50-70 m according to climatic conditions.Spiral Vibration Dampers have a helically formed damping section sized for interplay of damper and cable to provide the action/reaction motion that opposed the natural vibration wave. A smaller gripping section gently grips the cable so that cable and fiber are not damaged or distorted and there is no optical signal loss. These PVC Spiral dampers are recommended for the ADSS cable when the combination of span length and tension indicate by vibration review that external vibration protection is required.The UPB universal bracket is a pole hardware made of aluminum alloy offering high mechanical properties. Its unique design has been engineered so to offer an universal pole hardware solution able to adapt to all cable installation configurations on wooden, concrete or metal poles: Cable unroll on pulley Stay wire Cross-arm mounting Drop connection Dead-ending Junction points Angled passageways Derivation pointsAlso known as a pole fastener or a pole clamp, this is a pole accessory that is used for fastening or attaching other accessories onto the pole. A pole band will provide a platform where you can connect other accessories, devices, or even line connections directly to the pole.These turnbuckles are used to create tension in cables, ropes and chains by turning the body of the buckle to take up slack. Used with rope, twine, cables and like items in tensioning systems. Suitable for marine, outdoor or general applications. Comes in eye/eye, hook/eye and jaw/jaw configurations.
ContentFor fiber optic or copper cable, with round or flat cross section. For span length up to 50-70 m according to climatic conditions. Route deviation angle up to 20° Openable fastening loop which can be put into a ring or hole minimum Ø 14 mm. Distance between the cable and the hanging point on the loop: 70 mm Bilateral holding of the cable by two wedges with progressive tightening. Locking of the clamp by two double racks. Dimensions : L 80 mm, l 16 mm, H 85 mm.
Specification
Material Glass Filled Nylon
Weight (Kg) 0.020
Vertically Strenght (Dan) 120
Specification
Material : Aluminium Usage/ Application : Industrial Thikness : 14 mm Packaging Type : Box
Description
S.No.  Details Particulars
1. Type of Clamp Suspension Clamp
2. Type of design Mounting clamp with Insert arrangement. Multiple orientation allowability
3. Cable Diameter Range Ø8 - Ø20mm
4. Mounting Using Stainless Steel Strap or Bolts
5. Type & Grade of the Material Clamp Body -- UV Resistant Thermoplastic Insert --Elastomer
6. Minimum Breaking Load (in KN) 3.5 kN
7. Weight 125g
Specification
Material of UPC : Alluminium Alloy IS : 617 Tolerance : IS: 2102 Optional Nut, Bolt & Washer All Dimension Are in mm
Specification
Hot Dip Galvanized surface treatment, against rust and corision Material : Zinc
Specification
steel construction Zinc Plated
Weight.020 kg.310 kg.125 kgN/A1.620 kg.765 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight .020 kg
Weight .310 kg
Weight .125 kg
Weight 1.620 kg
Weight .765 kg
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare