Universal Pole Bracket-Single Run

200.60

In Stock

The UPB universal bracket is a pole hardware made of aluminum alloy offering high mechanical properties. Its unique design has been engineered so to offer an universal pole hardware solution able to adapt to all cable installation configurations on wooden, concrete or metal poles:
Cable unroll on pulley
Stay wire
Cross-arm mounting
Drop connection
Dead-ending
Junction points
Angled passageways
Derivation points

In Stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist

Description

Specification

Material of UPC : Alluminium Alloy IS : 617
Tolerance : IS: 2102
Optional Nut, Bolt & Washer
All Dimension Are in mm

Reviews

There are no reviews yet.

Be the first to review “Universal Pole Bracket-Single Run”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsUniversal Pole Bracket-Single Run removeSuspension Clamp-for 4-7mm Cable removeSuspension Helix removeSS Strap-107 removeSuspension Clamp-for 8-20mm Cable removeAdjustable Cable Storage Bracket remove
NameUniversal Pole Bracket-Single Run removeSuspension Clamp-for 4-7mm Cable removeSuspension Helix removeSS Strap-107 removeSuspension Clamp-for 8-20mm Cable removeAdjustable Cable Storage Bracket remove
Image
SKUZU49VORF95MKUCB59
Rating
Price200.6035.40428.0035.40234.851,324.00
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionThe UPB universal bracket is a pole hardware made of aluminum alloy offering high mechanical properties. Its unique design has been engineered so to offer an universal pole hardware solution able to adapt to all cable installation configurations on wooden, concrete or metal poles: Cable unroll on pulley Stay wire Cross-arm mounting Drop connection Dead-ending Junction points Angled passageways Derivation pointsFor fiber optic or copper cable, with round or flat cross section. For span length up to 50-70 m according to climatic conditions.Suspension Helix shall be made of hot dip galvanized high Tensile steel wires or Aluminum alloy which are laid side by side and glued together and bent to form a loop in the middle.For fastening of pole hardware.Adjustable Aluminum cable storage bracket made from aluminum alloy is rust resistant hence has a long service life. The arms of the bracket are also made from aluminum alloy hence once again it is rust free. The arms are very easily adjustable by using a spanner to control the arms extension. Easy to install on poles using straps with buckles.
Content
Specification
Material of UPC : Alluminium Alloy IS : 617 Tolerance : IS: 2102 Optional Nut, Bolt & Washer All Dimension Are in mm
For fiber optic or copper cable, with round or flat cross section. For span length up to 50-70 m according to climatic conditions. Route deviation angle up to 20° Openable fastening loop which can be put into a ring or hole minimum Ø 14 mm. Distance between the cable and the hanging point on the loop: 70 mm Bilateral holding of the cable by two wedges with progressive tightening. Locking of the clamp by two double racks. Dimensions : L 80 mm, l 16 mm, H 85 mm.
Specification
Material Glass Filled Nylon
Weight (Kg) 0.020
Vertically Strenght (Dan) 120
Specification
Material : Aluminium Usage/ Application : Industrial Thikness : 14 mm Packaging Type : Box
Specification
Width 10mm Approax
Thickness 0.5 ± 0.05MM Approax
Tensile Strength 7.5 KN
Tracebility Length
Packaging Type Plastic case
Length Per Roll 50 Mtr
Description
S.No.  Details Particulars
1. Type of Clamp Suspension Clamp
2. Type of design Mounting clamp with Insert arrangement. Multiple orientation allowability
3. Cable Diameter Range Ø8 - Ø20mm
4. Mounting Using Stainless Steel Strap or Bolts
5. Type & Grade of the Material Clamp Body -- UV Resistant Thermoplastic Insert --Elastomer
6. Minimum Breaking Load (in KN) 3.5 kN
7. Weight 125g
Specification
Material of Body Alluminium Alloy Grade (AA1200)
Material of ROD Alluminium Alloy as per IS-733-1983
Tolerance IS-2102
Fastners Grade IS 1364 Part 1-6
M10 NUT IS 2629
Fastners Bolt & Washer M10
All Dimension are in mm
WeightN/A.020 kg.315 kg.035 kg.125 kg.745 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight .020 kg
Weight .315 kg
Weight .035 kg
Weight .125 kg
Weight .745 kg
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare