Anchoring Clamp-for 4-7mm Cable

Weight .040 kg

44.85

In Stock
Item Description

For fiber optic or copper cable, with round or flat cross section.
“For span length up to 50-70 m according to climatic
conditions.”
Strength load up to 160 daN according to the cable used. It is recommended to perform a qualification strength test with the cable.
Openable fastening loop with clip closing, which can be put into a ring or hole minimum Ø 12 mm.
Dimensions : L 245 mm, l 27 mm, H 32 mm.

In Stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist

Description

Secification

Glass Filled Nylon
Outer Body Moc PA-6 30% GF Black
Saddle Moc PA-6 30% GF Black
Connecting Thread Moc is Neoprene
Connecting Thread Hardness :- 79 Shore A

Additional information

Weight .040 kg

Reviews

There are no reviews yet.

Be the first to review “Anchoring Clamp-for 4-7mm Cable”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsAnchoring Clamp-for 4-7mm Cable removeAnchoring Clamp-for 10-14mm Cable removeSuspension Clamp-for 4-7mm Cable removeAdjustable Cable Storage Bracket removeVIBERATION DAMPER removeTurn Buckle remove
NameAnchoring Clamp-for 4-7mm Cable removeAnchoring Clamp-for 10-14mm Cable removeSuspension Clamp-for 4-7mm Cable removeAdjustable Cable Storage Bracket removeVIBERATION DAMPER removeTurn Buckle remove
Image
SKUIKSA764ZU49VORUCB59
Rating
Price44.85392.9535.401,324.00356.00442.00
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Item Description
For fiber optic or copper cable, with round or flat cross section. "For span length up to 50-70 m according to climatic conditions." Strength load up to 160 daN according to the cable used. It is recommended to perform a qualification strength test with the cable. Openable fastening loop with clip closing, which can be put into a ring or hole minimum Ø 12 mm. Dimensions : L 245 mm, l 27 mm, H 32 mm.
Plastic Anchor Clamp Tension type is used for ending over head lines to poles or walls. The clamp is made of Plastic and can be used for Optical Fiber Cable Dia 10-14 mm. Plastic Anchor Clamp has a modular design which allows easy handling, compactness and is light weight. The design does not allow corrosion and UV rays to damage. Widely acclaimed for fixing the line at the end bracket. Commonly used for ADSS Installation Tension type for Optical Fiber Cables.For fiber optic or copper cable, with round or flat cross section. For span length up to 50-70 m according to climatic conditions.Adjustable Aluminum cable storage bracket made from aluminum alloy is rust resistant hence has a long service life. The arms of the bracket are also made from aluminum alloy hence once again it is rust free. The arms are very easily adjustable by using a spanner to control the arms extension. Easy to install on poles using straps with buckles.Spiral Vibration Dampers have a helically formed damping section sized for interplay of damper and cable to provide the action/reaction motion that opposed the natural vibration wave. A smaller gripping section gently grips the cable so that cable and fiber are not damaged or distorted and there is no optical signal loss. These PVC Spiral dampers are recommended for the ADSS cable when the combination of span length and tension indicate by vibration review that external vibration protection is required.These turnbuckles are used to create tension in cables, ropes and chains by turning the body of the buckle to take up slack. Used with rope, twine, cables and like items in tensioning systems. Suitable for marine, outdoor or general applications. Comes in eye/eye, hook/eye and jaw/jaw configurations.
Content
Secification
Glass Filled Nylon Outer Body Moc PA-6 30% GF Black Saddle Moc PA-6 30% GF Black Connecting Thread Moc is Neoprene Connecting Thread Hardness :- 79 Shore A
Specification
  • U Saddle Moc PA-6 30% GF (RAL 9005)
  • SS Rope Type Wire Grade 304
  • Wedge LH-RH Moc PA-6 30% GF (RAL 9005)
  • Aluminium Lug Grade 7075
  • Outer Body Moc PA-6 30% GF (RAL 9005)
  • SS Screw ITH Electroless Planting Grade C
For fiber optic or copper cable, with round or flat cross section. For span length up to 50-70 m according to climatic conditions. Route deviation angle up to 20° Openable fastening loop which can be put into a ring or hole minimum Ø 14 mm. Distance between the cable and the hanging point on the loop: 70 mm Bilateral holding of the cable by two wedges with progressive tightening. Locking of the clamp by two double racks. Dimensions : L 80 mm, l 16 mm, H 85 mm.
Specification
Material Glass Filled Nylon
Weight (Kg) 0.020
Vertically Strenght (Dan) 120
Specification
Material of Body Alluminium Alloy Grade (AA1200)
Material of ROD Alluminium Alloy as per IS-733-1983
Tolerance IS-2102
Fastners Grade IS 1364 Part 1-6
M10 NUT IS 2629
Fastners Bolt & Washer M10
All Dimension are in mm
Specification
Material : Aluminium Usage/ Application : Industrial Thikness : 14 mm Packaging Type : Box
Specification
steel construction Zinc Plated
Weight.040 kg.380 kg.020 kg.745 kg.310 kg.765 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight .040 kg
Weight .380 kg
Weight .020 kg
Weight .745 kg
Weight .310 kg
Weight .765 kg
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare