Anchoring Clamp-for 4-7mm Cable

Weight .040 kg

44.85

In Stock
Item Description

For fiber optic or copper cable, with round or flat cross section.
“For span length up to 50-70 m according to climatic
conditions.”
Strength load up to 160 daN according to the cable used. It is recommended to perform a qualification strength test with the cable.
Openable fastening loop with clip closing, which can be put into a ring or hole minimum Ø 12 mm.
Dimensions : L 245 mm, l 27 mm, H 32 mm.

In Stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist

Description

Secification

Glass Filled Nylon
Outer Body Moc PA-6 30% GF Black
Saddle Moc PA-6 30% GF Black
Connecting Thread Moc is Neoprene
Connecting Thread Hardness :- 79 Shore A

Additional information

Weight .040 kg

Reviews

There are no reviews yet.

Be the first to review “Anchoring Clamp-for 4-7mm Cable”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsAnchoring Clamp-for 4-7mm Cable removeSuspension Clamp-for 4-7mm Cable removePole Clamp- Type 2 removePole Clamp- Type 1 removeTurn Buckle removeAdjustable Cable Storage Bracket remove
NameAnchoring Clamp-for 4-7mm Cable removeSuspension Clamp-for 4-7mm Cable removePole Clamp- Type 2 removePole Clamp- Type 1 removeTurn Buckle removeAdjustable Cable Storage Bracket remove
Image
SKUZU49VORUCB59
Rating
Price44.8535.401,542.001,304.00442.001,324.00
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Item Description
For fiber optic or copper cable, with round or flat cross section. "For span length up to 50-70 m according to climatic conditions." Strength load up to 160 daN according to the cable used. It is recommended to perform a qualification strength test with the cable. Openable fastening loop with clip closing, which can be put into a ring or hole minimum Ø 12 mm. Dimensions : L 245 mm, l 27 mm, H 32 mm.
For fiber optic or copper cable, with round or flat cross section. For span length up to 50-70 m according to climatic conditions.Also known as a pole fastener or a pole clamp, this is a pole accessory that is used for fastening or attaching other accessories onto the pole. A pole band will provide a platform where you can connect other accessories, devices, or even line connections directly to the pole.These turnbuckles are used to create tension in cables, ropes and chains by turning the body of the buckle to take up slack. Used with rope, twine, cables and like items in tensioning systems. Suitable for marine, outdoor or general applications. Comes in eye/eye, hook/eye and jaw/jaw configurations.Adjustable Aluminum cable storage bracket made from aluminum alloy is rust resistant hence has a long service life. The arms of the bracket are also made from aluminum alloy hence once again it is rust free. The arms are very easily adjustable by using a spanner to control the arms extension. Easy to install on poles using straps with buckles.
Content
Secification
Glass Filled Nylon Outer Body Moc PA-6 30% GF Black Saddle Moc PA-6 30% GF Black Connecting Thread Moc is Neoprene Connecting Thread Hardness :- 79 Shore A
For fiber optic or copper cable, with round or flat cross section. For span length up to 50-70 m according to climatic conditions. Route deviation angle up to 20° Openable fastening loop which can be put into a ring or hole minimum Ø 14 mm. Distance between the cable and the hanging point on the loop: 70 mm Bilateral holding of the cable by two wedges with progressive tightening. Locking of the clamp by two double racks. Dimensions : L 80 mm, l 16 mm, H 85 mm.
Specification
Material Glass Filled Nylon
Weight (Kg) 0.020
Vertically Strenght (Dan) 120
Specification
Hot Dip Galvanized surface treatment, against rust and corision Material : Zinc
Hot Dip Galvanized surface treatment, against rust and corision
Specification
Material : Zinc
Specification
steel construction Zinc Plated
Specification
Material of Body Alluminium Alloy Grade (AA1200)
Material of ROD Alluminium Alloy as per IS-733-1983
Tolerance IS-2102
Fastners Grade IS 1364 Part 1-6
M10 NUT IS 2629
Fastners Bolt & Washer M10
All Dimension are in mm
Weight.040 kg.020 kg1.620 kg.975 kg.765 kg.745 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight .040 kg
Weight .020 kg
Weight 1.620 kg
Weight .975 kg
Weight .765 kg
Weight .745 kg
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare