Suspension Clamp-for 8-20mm Cable

Weight .125 kg

234.85

In Stock
In Stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist

Description

Description
S.No.  Details Particulars
1. Type of Clamp Suspension Clamp
2. Type of design Mounting clamp with Insert arrangement. Multiple orientation allowability
3. Cable Diameter Range Ø8 – Ø20mm
4. Mounting Using Stainless Steel Strap or Bolts
5. Type & Grade of the Material Clamp Body — UV Resistant Thermoplastic
Insert –Elastomer
6. Minimum Breaking Load (in KN) 3.5 kN
7. Weight 125g

Additional information

Weight .125 kg

Reviews

There are no reviews yet.

Be the first to review “Suspension Clamp-for 8-20mm Cable”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsSuspension Clamp-for 8-20mm Cable removePole Clamp- Type 3 removeBuckle CHA-10 removeAnchoring Clamp-for 10-14mm Cable removeSuspension Clamp-for 4-7mm Cable removeAdjustable Cable Storage Bracket remove
NameSuspension Clamp-for 8-20mm Cable removePole Clamp- Type 3 removeBuckle CHA-10 removeAnchoring Clamp-for 10-14mm Cable removeSuspension Clamp-for 4-7mm Cable removeAdjustable Cable Storage Bracket remove
Image
SKUML76APIKSA764ZU49VORUCB59
Rating
Price234.851,660.009.45392.9535.401,324.00
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionAlso known as a pole fastener or a pole clamp, this is a pole accessory that is used for fastening or attaching other accessories onto the pole. A pole band will provide a platform where you can connect other accessories, devices, or even line connections directly to the pole.Used to buckle a strap band width 10mm For Closing Stainless Steel StrapPlastic Anchor Clamp Tension type is used for ending over head lines to poles or walls. The clamp is made of Plastic and can be used for Optical Fiber Cable Dia 10-14 mm. Plastic Anchor Clamp has a modular design which allows easy handling, compactness and is light weight. The design does not allow corrosion and UV rays to damage. Widely acclaimed for fixing the line at the end bracket. Commonly used for ADSS Installation Tension type for Optical Fiber Cables.For fiber optic or copper cable, with round or flat cross section. For span length up to 50-70 m according to climatic conditions.Adjustable Aluminum cable storage bracket made from aluminum alloy is rust resistant hence has a long service life. The arms of the bracket are also made from aluminum alloy hence once again it is rust free. The arms are very easily adjustable by using a spanner to control the arms extension. Easy to install on poles using straps with buckles.
Content
Description
S.No.  Details Particulars
1. Type of Clamp Suspension Clamp
2. Type of design Mounting clamp with Insert arrangement. Multiple orientation allowability
3. Cable Diameter Range Ø8 - Ø20mm
4. Mounting Using Stainless Steel Strap or Bolts
5. Type & Grade of the Material Clamp Body -- UV Resistant Thermoplastic Insert --Elastomer
6. Minimum Breaking Load (in KN) 3.5 kN
7. Weight 125g
Specification
Hot Dip Galvanized surface treatment, against rust and corision Material : Zinc
Specification
Materail SS 304
Weight (Kg) 0.004
Specification
  • U Saddle Moc PA-6 30% GF (RAL 9005)
  • SS Rope Type Wire Grade 304
  • Wedge LH-RH Moc PA-6 30% GF (RAL 9005)
  • Aluminium Lug Grade 7075
  • Outer Body Moc PA-6 30% GF (RAL 9005)
  • SS Screw ITH Electroless Planting Grade C
For fiber optic or copper cable, with round or flat cross section. For span length up to 50-70 m according to climatic conditions. Route deviation angle up to 20° Openable fastening loop which can be put into a ring or hole minimum Ø 14 mm. Distance between the cable and the hanging point on the loop: 70 mm Bilateral holding of the cable by two wedges with progressive tightening. Locking of the clamp by two double racks. Dimensions : L 80 mm, l 16 mm, H 85 mm.
Specification
Material Glass Filled Nylon
Weight (Kg) 0.020
Vertically Strenght (Dan) 120
Specification
Material of Body Alluminium Alloy Grade (AA1200)
Material of ROD Alluminium Alloy as per IS-733-1983
Tolerance IS-2102
Fastners Grade IS 1364 Part 1-6
M10 NUT IS 2629
Fastners Bolt & Washer M10
All Dimension are in mm
Weight.125 kg2.470 kg.05 kg.380 kg.020 kg.745 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight .125 kg
Weight 2.470 kg
Weight .05 kg
Weight .380 kg
Weight .020 kg
Weight .745 kg
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare