| Description | For fastening of pole hardware. | Also known as a pole fastener or a pole clamp, this is a pole accessory that is used for fastening or attaching other accessories onto the pole. A pole band will provide a platform where you can connect other accessories, devices, or even line connections directly to the pole. | The UPB universal bracket is a pole hardware made of aluminum alloy offering high mechanical properties. Its unique design has been engineered so to offer an universal pole hardware solution able to adapt to all cable installation configurations on wooden, concrete or metal poles:
Cable unroll on pulley
Stay wire
Cross-arm mounting
Drop connection
Dead-ending
Junction points
Angled passageways
Derivation points | For fiber optic or copper cable, with round or flat cross section.
For span length up to 50-70 m according to climatic conditions. | Used to buckle a strap band width 10mm
For Closing Stainless Steel Strap | Adjustable Aluminum cable storage bracket made from aluminum alloy is rust resistant hence has a long service life. The arms of the bracket are also made from aluminum alloy hence once again it is rust free. The arms are very easily adjustable by using a spanner to control the arms extension. Easy to install on poles using straps with buckles. |
| Content | Specification
Width : 20mm Approax
Thickness : 0.7 ± 0.05MM Approax
Tensile Strength : 7.5 KN
Tracebility Length
Packaging Type : Plastic case
Length Per Roll : 50 Mtr | Specification
Hot Dip Galvanized surface treatment, against rust and corision
Material : Zinc | Specification
Material of UPC : Alluminium Alloy IS : 617
Tolerance : IS: 2102
Optional Nut, Bolt & Washer
All Dimension Are in mm | For fiber optic or copper cable, with round or flat cross section.
For span length up to 50-70 m according to climatic conditions.
Route deviation angle up to 20°
Openable fastening loop which can be put into a ring or hole minimum Ø 14 mm.
Distance between the cable and the hanging point on the loop: 70 mm
Bilateral holding of the cable by two wedges with progressive tightening. Locking of the clamp by two double racks.
Dimensions : L 80 mm, l 16 mm, H 85 mm.
Specification
| Material |
Glass Filled Nylon |
| Weight (Kg) |
0.020 |
| Vertically Strenght (Dan) |
120 |
| Specification
| Materail |
SS 304 |
| Weight (Kg) |
0.004 |
| Specification
| Material of Body |
Alluminium Alloy Grade (AA1200) |
| Material of ROD |
Alluminium Alloy as per IS-733-1983 |
| Tolerance |
IS-2102 |
| Fastners Grade |
IS 1364 Part 1-6 |
| M10 NUT IS |
2629 |
| Fastners |
Bolt & Washer M10 |
All Dimension are in mm |
Reviews
There are no reviews yet.