| Description | For fastening of pole hardware. | For fastening of pole hardware. | Item Description
For fiber optic or copper cable, with round or flat cross section.
"For span length up to 50-70 m according to climatic
conditions."
Strength load up to 160 daN according to the cable used. It is recommended to perform a qualification strength test with the cable.
Openable fastening loop with clip closing, which can be put into a ring or hole minimum Ø 12 mm.
Dimensions : L 245 mm, l 27 mm, H 32 mm. | Adjustable Aluminum cable storage bracket made from aluminum alloy is rust resistant hence has a long service life. The arms of the bracket are also made from aluminum alloy hence once again it is rust free. The arms are very easily adjustable by using a spanner to control the arms extension. Easy to install on poles using straps with buckles. | | For fiber optic or copper cable, with round or flat cross section.
For span length up to 50-70 m according to climatic conditions. |
| Content | Specification
Width : 20mm Approax
Thickness : 0.7 ± 0.05MM Approax
Tensile Strength : 7.5 KN
Tracebility Length
Packaging Type : Plastic case
Length Per Roll : 50 Mtr | Specification
| Width |
10mm Approax |
| Thickness |
0.5 ± 0.05MM Approax |
| Tensile Strength |
7.5 KN |
| Tracebility Length |
|
| Packaging Type |
Plastic case |
| Length Per Roll |
50 Mtr |
| Secification
Glass Filled Nylon
Outer Body Moc PA-6 30% GF Black
Saddle Moc PA-6 30% GF Black
Connecting Thread Moc is Neoprene
Connecting Thread Hardness :- 79 Shore A | Specification
| Material of Body |
Alluminium Alloy Grade (AA1200) |
| Material of ROD |
Alluminium Alloy as per IS-733-1983 |
| Tolerance |
IS-2102 |
| Fastners Grade |
IS 1364 Part 1-6 |
| M10 NUT IS |
2629 |
| Fastners |
Bolt & Washer M10 |
All Dimension are in mm | Hot Dip Galvanized surface treatment, against rust and corision
Specification
Material : Zinc | For fiber optic or copper cable, with round or flat cross section.
For span length up to 50-70 m according to climatic conditions.
Route deviation angle up to 20°
Openable fastening loop which can be put into a ring or hole minimum Ø 14 mm.
Distance between the cable and the hanging point on the loop: 70 mm
Bilateral holding of the cable by two wedges with progressive tightening. Locking of the clamp by two double racks.
Dimensions : L 80 mm, l 16 mm, H 85 mm.
Specification
| Material |
Glass Filled Nylon |
| Weight (Kg) |
0.020 |
| Vertically Strenght (Dan) |
120 |
|
Reviews
There are no reviews yet.