| Description | For fastening of pole hardware. | Also known as a pole fastener or a pole clamp, this is a pole accessory that is used for fastening or attaching other accessories onto the pole. A pole band will provide a platform where you can connect other accessories, devices, or even line connections directly to the pole. | For fiber optic or copper cable, with round or flat cross section.
For span length up to 50-70 m according to climatic conditions. | Plastic Anchor Clamp Tension type is used for ending over head lines to poles or walls. The clamp is made of Plastic and can be used for Optical Fiber Cable Dia 10-14 mm. Plastic Anchor Clamp has a modular design which allows easy handling, compactness and is light weight. The design does not allow corrosion and UV rays to damage. Widely acclaimed for fixing the line at the end bracket.
Commonly used for ADSS Installation Tension type for Optical Fiber Cables. | | Used to buckle a strap band width 10mm
For Closing Stainless Steel Strap |
| Content | Specification
| Width |
10mm Approax |
| Thickness |
0.5 ± 0.05MM Approax |
| Tensile Strength |
7.5 KN |
| Tracebility Length |
|
| Packaging Type |
Plastic case |
| Length Per Roll |
50 Mtr |
| Specification
Hot Dip Galvanized surface treatment, against rust and corision
Material : Zinc | For fiber optic or copper cable, with round or flat cross section.
For span length up to 50-70 m according to climatic conditions.
Route deviation angle up to 20°
Openable fastening loop which can be put into a ring or hole minimum Ø 14 mm.
Distance between the cable and the hanging point on the loop: 70 mm
Bilateral holding of the cable by two wedges with progressive tightening. Locking of the clamp by two double racks.
Dimensions : L 80 mm, l 16 mm, H 85 mm.
Specification
| Material |
Glass Filled Nylon |
| Weight (Kg) |
0.020 |
| Vertically Strenght (Dan) |
120 |
| Specification
- U Saddle Moc PA-6 30% GF (RAL 9005)
- SS Rope Type Wire Grade 304
- Wedge LH-RH Moc PA-6 30% GF (RAL 9005)
- Aluminium Lug Grade 7075
- Outer Body Moc PA-6 30% GF (RAL 9005)
- SS Screw ITH Electroless Planting Grade C
| Description
| S.No. |
Details |
Particulars |
| 1. |
Type of Clamp |
Suspension Clamp |
| 2. |
Type of design |
Mounting clamp with Insert arrangement. Multiple orientation allowability |
| 3. |
Cable Diameter Range |
Ø8 - Ø20mm |
| 4. |
Mounting |
Using Stainless Steel Strap or Bolts |
| 5. |
Type & Grade of the Material |
Clamp Body -- UV Resistant Thermoplastic
Insert --Elastomer |
| 6. |
Minimum Breaking Load (in KN) |
3.5 kN |
| 7. |
Weight |
125g |
| Specification
| Materail |
SS 304 |
| Weight (Kg) |
0.004 |
|
admin –
Sed perspiciatis unde omnis iste natus error sit voluptatem accusantium doloremque laudantium.