| Description | | For fastening of pole hardware. | For fiber optic or copper cable, with round or flat cross section.
For span length up to 50-70 m according to climatic conditions. | Item Description
For fiber optic or copper cable, with round or flat cross section.
"For span length up to 50-70 m according to climatic
conditions."
Strength load up to 160 daN according to the cable used. It is recommended to perform a qualification strength test with the cable.
Openable fastening loop with clip closing, which can be put into a ring or hole minimum Ø 12 mm.
Dimensions : L 245 mm, l 27 mm, H 32 mm. | Bracket Single Run used for Drop Wire in Telecommunication Industry | These turnbuckles are used to create tension in cables, ropes and chains by turning the body of the buckle to take up slack. Used with rope, twine, cables and like items in tensioning systems. Suitable for marine, outdoor or general applications. Comes in eye/eye, hook/eye and jaw/jaw configurations. |
| Content | Hot Dip Galvanized surface treatment, against rust and corision
Specification
Material : Zinc | Specification
| Width |
10mm Approax |
| Thickness |
0.5 ± 0.05MM Approax |
| Tensile Strength |
7.5 KN |
| Tracebility Length |
|
| Packaging Type |
Plastic case |
| Length Per Roll |
50 Mtr |
| For fiber optic or copper cable, with round or flat cross section.
For span length up to 50-70 m according to climatic conditions.
Route deviation angle up to 20°
Openable fastening loop which can be put into a ring or hole minimum Ø 14 mm.
Distance between the cable and the hanging point on the loop: 70 mm
Bilateral holding of the cable by two wedges with progressive tightening. Locking of the clamp by two double racks.
Dimensions : L 80 mm, l 16 mm, H 85 mm.
Specification
| Material |
Glass Filled Nylon |
| Weight (Kg) |
0.020 |
| Vertically Strenght (Dan) |
120 |
| Secification
Glass Filled Nylon
Outer Body Moc PA-6 30% GF Black
Saddle Moc PA-6 30% GF Black
Connecting Thread Moc is Neoprene
Connecting Thread Hardness :- 79 Shore A | Specification
Glass Filled Nylon
MOC IS PA-6 30% GF Black
Dimension in mm (L*B*H): 72.8*47.2*31.2 | Specification
steel construction
Zinc Plated |
Reviews
There are no reviews yet.