Description | | For fastening of pole hardware. | Also known as a pole fastener or a pole clamp, this is a pole accessory that is used for fastening or attaching other accessories onto the pole. A pole band will provide a platform where you can connect other accessories, devices, or even line connections directly to the pole. | For fiber optic or copper cable, with round or flat cross section.
For span length up to 50-70 m according to climatic conditions. | Item Description
For fiber optic or copper cable, with round or flat cross section.
"For span length up to 50-70 m according to climatic
conditions."
Strength load up to 160 daN according to the cable used. It is recommended to perform a qualification strength test with the cable.
Openable fastening loop with clip closing, which can be put into a ring or hole minimum Ø 12 mm.
Dimensions : L 245 mm, l 27 mm, H 32 mm. | Spiral Vibration Dampers have a helically formed damping section sized for interplay of damper and cable to provide the action/reaction motion that opposed the natural vibration wave. A smaller gripping section gently grips the cable so that cable and fiber are not damaged or distorted and there is no optical signal loss. These PVC Spiral dampers are recommended for the ADSS cable when the combination of span length and tension indicate by vibration review that external vibration protection is required. |
Content |
Product Code |
STTB |
Max. band width (mm) |
<25 |
Max. band thickness (mm) |
<1.2 |
| Specification
Width |
10mm Approax |
Thickness |
0.5 ± 0.05MM Approax |
Tensile Strength |
7.5 KN |
Tracebility Length |
|
Packaging Type |
Plastic case |
Length Per Roll |
50 Mtr |
| Specification
Hot Dip Galvanized surface treatment, against rust and corision
Material : Zinc | For fiber optic or copper cable, with round or flat cross section.
For span length up to 50-70 m according to climatic conditions.
Route deviation angle up to 20°
Openable fastening loop which can be put into a ring or hole minimum Ø 14 mm.
Distance between the cable and the hanging point on the loop: 70 mm
Bilateral holding of the cable by two wedges with progressive tightening. Locking of the clamp by two double racks.
Dimensions : L 80 mm, l 16 mm, H 85 mm.
Specification
Material |
Glass Filled Nylon |
Weight (Kg) |
0.020 |
Vertically Strenght (Dan) |
120 |
| Secification
Glass Filled Nylon
Outer Body Moc PA-6 30% GF Black
Saddle Moc PA-6 30% GF Black
Connecting Thread Moc is Neoprene
Connecting Thread Hardness :- 79 Shore A | Specification
Material : Aluminium
Usage/ Application : Industrial
Thikness : 14 mm
Packaging Type : Box |
Reviews
There are no reviews yet.