Anchoring Clamp-for 10-14mm Cable
₹392.95
Plastic Anchor Clamp Tension type is used for ending over head lines to poles or walls. The clamp is made of Plastic and can be used for Optical Fiber Cable Dia 10-14 mm. Plastic Anchor Clamp has a modular design which allows easy handling, compactness and is light weight. The design does not allow corrosion and UV rays to damage. Widely acclaimed for fixing the line at the end bracket.
Commonly used for ADSS Installation Tension type for Optical Fiber Cables.
In Stock
Add to Wishlist
Add to Wishlist
- Type: Organic
- MFG: Jun 4.2021
- LIFE: 30 Days
Description
Specification
- U Saddle Moc PA-6 30% GF (RAL 9005)
- SS Rope Type Wire Grade 304
- Wedge LH-RH Moc PA-6 30% GF (RAL 9005)
- Aluminium Lug Grade 7075
- Outer Body Moc PA-6 30% GF (RAL 9005)
- SS Screw ITH Electroless Planting Grade C
Additional information
| Weight | .380 kg |
|---|
1 review for Anchoring Clamp-for 10-14mm Cable
Quick Comparison
| Settings | Anchoring Clamp-for 10-14mm Cable remove | Adjustable Cable Storage Bracket remove | Buckle CHA-10 remove | Pole Clamp- Type 1 remove | VIBERATION DAMPER remove | Anchoring Clamp-for 4-7mm Cable remove | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | Anchoring Clamp-for 10-14mm Cable remove | Adjustable Cable Storage Bracket remove | Buckle CHA-10 remove | Pole Clamp- Type 1 remove | VIBERATION DAMPER remove | Anchoring Clamp-for 4-7mm Cable remove | ||||||||||||||||
| Image | |  |  |  |  |  | ||||||||||||||||
| SKU | IKSA764 | UCB59 | ML76AP | |||||||||||||||||||
| Rating | ||||||||||||||||||||||
| Price | ₹392.95 | ₹1,324.00 | ₹9.45 | ₹1,304.00 | ₹356.00 | ₹44.85 | ||||||||||||||||
| Stock |
In Stock
|
In Stock
|
In Stock
|
In Stock
|
In Stock
|
In Stock
| ||||||||||||||||
| Availability | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock | ||||||||||||||||
| Add to cart | ||||||||||||||||||||||
| Description | Plastic Anchor Clamp Tension type is used for ending over head lines to poles or walls. The clamp is made of Plastic and can be used for Optical Fiber Cable Dia 10-14 mm. Plastic Anchor Clamp has a modular design which allows easy handling, compactness and is light weight. The design does not allow corrosion and UV rays to damage. Widely acclaimed for fixing the line at the end bracket. Commonly used for ADSS Installation Tension type for Optical Fiber Cables. | Adjustable Aluminum cable storage bracket made from aluminum alloy is rust resistant hence has a long service life. The arms of the bracket are also made from aluminum alloy hence once again it is rust free. The arms are very easily adjustable by using a spanner to control the arms extension. Easy to install on poles using straps with buckles. | Used to buckle a strap band width 10mm For Closing Stainless Steel Strap | Spiral Vibration Dampers have a helically formed damping section sized for interplay of damper and cable to provide the action/reaction motion that opposed the natural vibration wave. A smaller gripping section gently grips the cable so that cable and fiber are not damaged or distorted and there is no optical signal loss. These PVC Spiral dampers are recommended for the ADSS cable when the combination of span length and tension indicate by vibration review that external vibration protection is required. | Item DescriptionFor fiber optic or copper cable, with round or flat cross section. "For span length up to 50-70 m according to climatic conditions." Strength load up to 160 daN according to the cable used. It is recommended to perform a qualification strength test with the cable. Openable fastening loop with clip closing, which can be put into a ring or hole minimum Ø 12 mm. Dimensions : L 245 mm, l 27 mm, H 32 mm. | |||||||||||||||||
| Content | Specification
| Specification
| Specification
| Hot Dip Galvanized surface treatment, against rust and corision
SpecificationMaterial : Zinc | SpecificationMaterial : Aluminium Usage/ Application : Industrial Thikness : 14 mm Packaging Type : Box | SecificationGlass Filled Nylon Outer Body Moc PA-6 30% GF Black Saddle Moc PA-6 30% GF Black Connecting Thread Moc is Neoprene Connecting Thread Hardness :- 79 Shore A | ||||||||||||||||
| Weight | .380 kg | .745 kg | .05 kg | .975 kg | .310 kg | .040 kg | ||||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||
| Additional information |
|
|
|
|
|
|
Related products
admin –
Sed perspiciatis unde omnis iste natus error sit voluptatem accusantium doloremque laudantium.