Adjustable Cable Storage Bracket

Weight .745 kg
SKU: UCB59

1,324.00

In Stock

Adjustable Aluminum cable storage bracket made from aluminum alloy is rust resistant hence has a long service life. The arms of the bracket are also made from aluminum alloy hence once again it is rust free. The arms are very easily adjustable by using a spanner to control the arms extension. Easy to install on poles using straps with buckles.

In Stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
  • Type: Organic
  • MFG: July 4.2021
  • LIFE: 50 Days
SKU: UCB59 Category:

Description

Specification
Material of Body Alluminium Alloy Grade (AA1200)
Material of ROD Alluminium Alloy as per IS-733-1983
Tolerance IS-2102
Fastners Grade IS 1364 Part 1-6
M10 NUT IS 2629
Fastners Bolt & Washer M10

All Dimension are in mm

Additional information

Weight .745 kg

1 review for Adjustable Cable Storage Bracket

  1. admin

    Sed perspiciatis unde omnis iste natus error sit voluptatem accusantium doloremque laudantium.

Add a review

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsAdjustable Cable Storage Bracket removeSuspension Clamp-for 4-7mm Cable removeAnchoring Clamp-for 4-7mm Cable removePole Clamp- Type 1 removeAnchoring Clamp-for 10-14mm Cable removeTurn Buckle remove
NameAdjustable Cable Storage Bracket removeSuspension Clamp-for 4-7mm Cable removeAnchoring Clamp-for 4-7mm Cable removePole Clamp- Type 1 removeAnchoring Clamp-for 10-14mm Cable removeTurn Buckle remove
Image
SKUUCB59ZU49VORIKSA764
Rating
Price1,324.0035.4044.851,304.00392.95442.00
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionAdjustable Aluminum cable storage bracket made from aluminum alloy is rust resistant hence has a long service life. The arms of the bracket are also made from aluminum alloy hence once again it is rust free. The arms are very easily adjustable by using a spanner to control the arms extension. Easy to install on poles using straps with buckles.For fiber optic or copper cable, with round or flat cross section. For span length up to 50-70 m according to climatic conditions.
Item Description
For fiber optic or copper cable, with round or flat cross section. "For span length up to 50-70 m according to climatic conditions." Strength load up to 160 daN according to the cable used. It is recommended to perform a qualification strength test with the cable. Openable fastening loop with clip closing, which can be put into a ring or hole minimum Ø 12 mm. Dimensions : L 245 mm, l 27 mm, H 32 mm.
Plastic Anchor Clamp Tension type is used for ending over head lines to poles or walls. The clamp is made of Plastic and can be used for Optical Fiber Cable Dia 10-14 mm. Plastic Anchor Clamp has a modular design which allows easy handling, compactness and is light weight. The design does not allow corrosion and UV rays to damage. Widely acclaimed for fixing the line at the end bracket. Commonly used for ADSS Installation Tension type for Optical Fiber Cables.These turnbuckles are used to create tension in cables, ropes and chains by turning the body of the buckle to take up slack. Used with rope, twine, cables and like items in tensioning systems. Suitable for marine, outdoor or general applications. Comes in eye/eye, hook/eye and jaw/jaw configurations.
Content
Specification
Material of Body Alluminium Alloy Grade (AA1200)
Material of ROD Alluminium Alloy as per IS-733-1983
Tolerance IS-2102
Fastners Grade IS 1364 Part 1-6
M10 NUT IS 2629
Fastners Bolt & Washer M10
All Dimension are in mm
For fiber optic or copper cable, with round or flat cross section. For span length up to 50-70 m according to climatic conditions. Route deviation angle up to 20° Openable fastening loop which can be put into a ring or hole minimum Ø 14 mm. Distance between the cable and the hanging point on the loop: 70 mm Bilateral holding of the cable by two wedges with progressive tightening. Locking of the clamp by two double racks. Dimensions : L 80 mm, l 16 mm, H 85 mm.
Specification
Material Glass Filled Nylon
Weight (Kg) 0.020
Vertically Strenght (Dan) 120
Secification
Glass Filled Nylon Outer Body Moc PA-6 30% GF Black Saddle Moc PA-6 30% GF Black Connecting Thread Moc is Neoprene Connecting Thread Hardness :- 79 Shore A
Hot Dip Galvanized surface treatment, against rust and corision
Specification
Material : Zinc
Specification
  • U Saddle Moc PA-6 30% GF (RAL 9005)
  • SS Rope Type Wire Grade 304
  • Wedge LH-RH Moc PA-6 30% GF (RAL 9005)
  • Aluminium Lug Grade 7075
  • Outer Body Moc PA-6 30% GF (RAL 9005)
  • SS Screw ITH Electroless Planting Grade C
Specification
steel construction Zinc Plated
Weight.745 kg.020 kg.040 kg.975 kg.380 kg.765 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight .745 kg
Weight .020 kg
Weight .040 kg
Weight .975 kg
Weight .380 kg
Weight .765 kg
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare